Changing or Deleting the Password

You can delete or change the password only after entering the current password.

The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice.

Changing the Password

Execute System Setup, enter the password, and press [Enter].
After moving [Security] by using the arrow keys from the setup start screen, click [Set Supervisor Password] and press [Enter].
When the Set Supervisor Password setting screen appears, enter the current password in [Enter Current Password].
Press [Enter] in [Enter New Password] and [Confirm New Password].
When the Notice screen appears, press the [Enter] key.
To save the changes in the system setup, press [F10].
When the Setup Confirmation screen appears, check [Yes] and press the [Enter] key. The PC will restart.

Execute System Setup, enter the password, and press [Enter].
After moving [Security] by using the arrow keys from the setup start screen, click [Set NVME1 Password] and press [Enter].

Tip:
Depending on the model, the menu name may be displayed as NVMe™ Password, SSD Password, etc.

For models equipped with two NVMe™ devices installed, the menu names are displayed as NVMe™1, NVMe™2, and if NVMe™ and SSD are installed, they are displayed as NVMe™1, SSD01, etc.
When the Password setting change screen appears, enter the current password in the [Enter Current Password] field.
Press [Enter] in [Enter New Password] and [Confirm New Password].
When the Notice screen appears, press the [Enter] key.
To save the changes in the system setup, press [F10].
When the Setup Confirmation screen appears, check [Yes] and press the [Enter] key. The PC will restart.